[ENABLE refresh]
[Fri 13:29] <metallicafatcat> search
[Fri 12:07] <Kobbul94> nvm better question, dose swiss cheasing a piston weaken it at all and is there a spetial way to drill it to not loose streangth?
[Fri 11:54] <Kobbul94> what is swisscheasing a piston?
[Fri 10:41] <magpul> the lion mosfet selling anytime soon?
[Fri 04:43] <LYNG> I found using cold motor connectors and the big t-connectors for the battery, then the heat dissapered from the wires
[Fri 04:43] <LYNG> Well if the motor and batt. connectors are same quality then it´s not good then 
[Thu 18:54] <zaido> anyone know if prometheus wiring are any good for super rof....possibly around 40rps...the wire starts to heat up much more quickly than my standard g&p wiring...any suggestions?
[Thu 18:53] <zaido> you have to first remove the motor brush and spring, then you unscrew the screws and it should just pop off...thats what i did on my g&g motor
[Thu 17:36] <Deviated Rationality> Can any tell me how to take apart the motor tabs so I can swap them out?
[Wed 20:42] <Rooster> HS% u have mail 
[Wed 03:24] <siklon> It's always best to reduce the mass of piston, less stress on 1st piston tooth & as Day said.
[Tue 19:44] <Day> It can't hurt at all, less to worry about with pre mature engagement
[Tue 18:55] <zaido> i forgot to mention that i also corrected my AOE and i am running on an 11.1 25C 2200mAh
[Tue 18:54] <zaido> Is it necessary to swiss cheese a piston when running 13:1 gears for super high speed setups? i already short stroked 3 teeth off the sector gear. you i swiss cheese my piston still?
[Tue 18:51] <zaido> thanks for the aoe help from both of you
[Tue 09:47] <aznriptide859> Read: http://forums.airsoftmechanics.com/index.php?topic=956.msg6626#msg6626
[Tue 03:48] <LYNG> ZAIDO : arr 1 o´clock
[Mon 21:47] <zaido> can someone tell me about fixing aoe? at what position is the sector supposed to hit the piston? 1 o'clock or 12' o'clock or middle
[Mon 16:59] <metallicafatcat> Siklon, its just a class I was signed up for in highschool and none of my freinds have been it and it seems like some of the older guys here could help.
[Mon 12:20] <siklon> Haha my grammar is hilarious, anesthetics & amnesia 
[Mon 10:26] <siklon> LYNG, you can easily find guides if you Google "airsoft AoE mod"
[Mon 09:24] <LYNG> Can anyone help me with finding the link for aoe mod??
[Mon 07:53] <siklon> What are you trying to attempt, metallicafatcat?
[Mon 07:39] <metallicafatcat> Any advice for Basic Drafting and Auto CAD classes?
[Sun 11:02] <Chairsofter1138> Goodbye Madbull UAV, hello Parrot Drone! http://ardrone3.parrot.com/ardrone.parrot.com/parrot-ar-drone/usa.html
[Fri 21:49] <metallicafatcat> yeah from modify 
jk get them from riot but there is like a 9% sales tax to cali.
jk get them from riot but there is like a 9% sales tax to cali.[Fri 21:28] <zaido> Does anyone know where i can get dual secotr gears here in southern california?
[Thu 21:01] <Day> Anyone around that has a v3 we scar?
[Thu 13:59] <LYNG> Metallicafatcat : Pretty normal if you didnt get the little plastic role in place first time
[Thu 13:48] <metallicafatcat> For all the guys for answer my hop up problem. Suprisingly just after taking off the outer barrel and reinstalling it worked fine which is causing me some confusion???
[Wed 22:46] <metallicafatcat> nope, most of us come her with some info about the site already or have exp with GBs so it doesn't matter
[Wed 19:06] <Serov> I'm a total newb to the forum...is there a 'intro thread' I should be posting in or some such guys?
[Tue 12:05] <para bellum> trigger keeps popping out
[Mon 20:28] <metallicafatcat> Hopefully, I wont have to resort to that when I get the new hop up unit it
[Mon 20:28] <metallicafatcat> Ohh lol 
[Mon 17:25] <Collat3ral> It works like the o-rings
[Mon 17:25] <Collat3ral> I use it. U put in on the barrel and slide the thing in
[Mon 12:26] <metallicafatcat> That's way to big for the hop up spring.
[Mon 12:07] <Collat3ral> Use the spring from the long type motor
[Mon 02:34] <motorhead> but yes, they're supposed to bounce out of the outer barrel
[Mon 02:34] <motorhead> Try offsetting your hop up unit with O-rings (don't know the official size). forget the spring 
[Sun 22:05] <metallicafatcat> Yeah, it could be bent, It looks a little bent. I'll go check it out.
[Sun 21:52] <Brute71> my guess is that the spring is bent causing the hopup to bind (had this happen to my SCAR, it uses the same style of system to push the unit into the gearbox)
[Sun 21:24] <metallicafatcat> Like being pushed back some by the spring on it? Mine won't bounce because I think It is getting stuck somewhere 
[Sun 21:13] <Day> what do u mean by bounce?
[Sun 21:10] <metallicafatcat> Just wondering a quick question, are M4 variant hop-ups suppose to bounce around on the spring?
[Fri 20:02] <Day> what wont last?
[Thu 19:05] <axisofoil> it won't last.
[Tue 14:05] <Day> Hiya!
[Tue 06:33] <malloski> Hello ASM!